3D Printer & Supplies (596)

Features: 1. Durable and practical 2. Designed specifically for linear motion 3. GT2 Pulley and GT2 Belt are used together,very convenient to use 4. R ound tooth shape ensures smooth belt teeth 5. 20 Teeth contact with the belt, that minimizes the chance of the belt slippings Specifications: GT2 Pulley: Teeth: 20 GrooveWidth: Approx. 7mm Total Width: Approx. 16mm Diameter of Bore: Approx. 5mm Flange: Double Material: Aluminium GT2 Belt: Pitch: GT2 Width: Approx. 6mm Length: Approx. 10m Package included: 1 x GT2 Belt 10 x GT2 Pulley 20 x Screws 1 x Wrench           , , ,

Compatible with: BMG Extruder Titan Extruder Support Short Range Input & PTFE Tube Package Included: 1* Gantry Extrusion Kit

Introductions: It is the new version about Titan extruder which different from the old one.  The upgraded Titan extruder advantages:      1. Feeding torque is large. 2. Product is compact and light. 3. Support remote and short-distance feeding. 4. Strong compatibility (can used with all the filaments of 1.75mm in the market, and mainly optimized the performance of the remote printing with the flexible filament such as the TPU.) 5. Using with the high-strength engineering materials injection molding products that resistant to aging. 6. For the gear reducer structure, the motor is lightweight and little, but with outstanding torque and resolution. The feeding speed is more stable to improve the print quality and effectively reduce the overall weight.  The assembled steps for you to refer: 1. Video 2. PDF Parameters: - Product Name: Titan Extruder -  Type: V6 Bowden Extruder      -  Filament diameter: 1.75mm -  Working voltage: 12V.   -  Suit for: 34mm Nema 17 Stepper Motor The new Titan extruder compared to the old one:   1. Cancel the M3 screw at the red circle arrow position.  2. The extrusion feed gear is changed to the integrated injection molding, which makes it stable.  3. Redesign and strengthen the force position. The structure of the new Titan is more reliable and more durable.  4. Hand-tightening screw. With integrated injection molding looks beautiful and the product body is more coordinated and low cost.  About the trigger part  ① Optimize the trigger finger position to use more conveniently and more labor-saving.   ② Optimized the feeding port guide to facilitate direct loading of filaments.   (The original version is 4mm large hole with outer diameter 4*2mm Teflon tube, the feeding is easy to be misplaced)  ③ Use U-slot guide wheel design, which makes the feeding without deviation to reduce the torque and no loss of the extrusion gear.   ④ The new version have been optimize the question that Serious loss of the motor when the torque is severe and the motor will be locked and not work.  ⑤ The new bearing can effectively avoid the friction between the rubber hole and the motor shaft, and reduce the torque loss caused by the hole lock the motor due to the rubber parts, and it can effectively protect the rubber parts from damage.  About the Stepper Motor p arameters: Package Included: 1 set Unassembled Titan Extruder kit 1 x Stepper Motor

Note: without wifi function now. Features: - Very light, carry and go. Very quiet. Certificate: CE,FCC,RoHs - Super easy to install , simple operation and convenient.- Suitable for household steam education use or DIY amateurs.- For children and families, so I print PLA safefy filament only. APP operation video: youtu.be User Manual Install Manual Specification:   Model Name: X4Brand: Easythreed Print Technology: FDM Automatic bed leveling: NO Upgraded Building Size: 150X150X150mm Number of Nozzle : 1Nozzle Diameter: 0.4mm Layer Thickness: 0.05-0.4mmPrinting Filament: PLA Diameter of Filament: 1.75mm Printing Accuracy: 0.05-0.2mm Hotbed: With heatbed  0-50℃Slicer Software: Easyware X34, CURA,Simplify3DExtruder Temperature: 180-230℃Print Speed:  10-40mm/s FilaFormat: Input:.Stl/obj, output:.gcode Power:  12V, 60W Machine Size: 255*260*295mmGift box Size: 140*310*310mm  Machine GROSS weight： 2.7KG   Machine NET weight： 1.8KG  Building Platform: Removable Support OS: Windows XP/7/8/10 (32 bit/64bit) Print Connectivity: TF Card, USB Cable,Industry Certifications: CE, FCC, RoHS    Package Included:1 x X1 3D Printer Kit1 x Power 1 x USB Cable1 x TF Card1 x Card Reader1 x User Manual1 x Cross Screwdriver1 x 10M PLA  1.75  Filament (color random)1 x Filament Holder setIncluded: Software Accessories inside TF card

3D Printer Controller RAMPS 1.4: The RepRap Arduin0 compatible ME GA Pololu Shield, or RAMPS for short. It is designed to fit the entire electronics needed for a RepRap in one small package for low cost. RAMPS interfaces an Arduin0 compatible Me ga with the powerful Arduin0 compatible ME GA platform and has plenty room for expansion. The modular design includes plug in stepper drivers and extruder control electronics on an Arduin0 compatible ME GA shield for easy service, part replacement, upgrade-ability and expansion. Additionally, a number of Arduin0 expansion boards can be added to the system as long as the main RAMPS board is kept to the top of the stack. Features: USB type B receptacle. SDcard add on available. Fits 5 Pololu stepper driver board. Expandable to control other accessories. Heated bed control with additional 11A fuse. Option to connect 2 motors to Z for Prusa Mendel. I2C and SPI pins left available for future expansion. It has provisions for the cartesian robot and extruder. All the Mosfets are hooked into PWM pins for versatility. 3 mosfets for heater / fan outputs and 3 thermistor circuits. Fused at 5A for additional safety and component protection. Pololu boards are on pin header sockets so they can be replaced easily or removed for use in future designs. Servo style connectors are used to connect to the endstops, motors, and leds. These connectors are gold plated, rated for 3A, very compact, and globally available. Me ga2560 R3: Fully compatible with original Arduin0 Me ga2560 R3, with this product, you are able to use all the Ar duin0 open source platform to create or learn interactive objects. Compared with UNOR3, this is with main Chip ATme ga2560, with more I/O Pins, and additional 10 PWM output, of course, the EEPROM is also with larger space. A4988 StepStick Compatible Stepper Motor Driver Module: A4988 is a complete microstepping motor driver with built-in translator for easy operation. This product is available in full, half, 1/4, 1/8 and 1/16 step modes operate bipolar stepper motors, output drive capacity of up to 35 V and +- 2 A.  A4988 includes a fixed off-time current regulator, the regulator in slow or mixed decay modes. A4988 converter is the key to the easy implementation. As long as the "step" input inputting one pulse drives the motor one microstep. There are no phase se0uence tables, high frequency control lines, or complex interfaces to program. A4988 interface is very suitable for complex microprocessor  unavailable or overburdened. In the micro-step operation, A4988 chopping control inside automatically selects the current decay mode (Slow or Mixed). In mixed decay mode, the device is initially set to a fixed downtime in some fast decay, then the rest of the slow decay downtime. Mixed decay current control scheme results in reduced audible motor noise, increased step accuracy, and reduced power consumption. Internal synchronous rectification control circuitry is provided to improve the pulse-width modulation (PWM) operation power consumption. Internal circuit protection includes: thermal shutdown with hysteresis, undervoltage lockout (UVLO), and crossover-current protection. Special power se0uencing. A4988 surface mount QFN package (ES), a size of 5 mm x 5 mm, nominal overall package height of 0.90 mm, with an exposed pad for enhanced thermal dissipation. This package is Pb (suffix-T), with 100% matte tin leadframe plating. Note: PCB Colors May vary LCD 2004 Graphic Smart Display Controller: This full graphic Smart Controller contains a SDcard reader, an rotary encoder and a 128 x 64 dot matrix LCD display. You can easy connect it to your Ramps board using the "smart adapter" included. After connecting this panel to your Ramps you don't need your pc any more, the Smart Controller supplies power for your SDcard. Further more all actions like calibration, axes movements can be done by just using the rotary encoder on the Smart Controller. Print your 3D designs without PC, just with a g-code design stored on the SDcard. Package includes: 1 x 3D Printer Controller RAMPS 1.4 Board 1 x Me ga2560 R3 5 x A4988 StepStick Stepper Motor Driver Module 1 x LCD 2004 Craphic Smart Display Controller 1 x USB Cable

Features: High speed printing, Rapid molding;Polychrome, Matte finished;Uniform color, Unique texture! Note: Due to different displays and different light, there may be a little difference between the color of the picture and the actual color. Specifications: Brand： Creality 3DModel： HP-PLAX3Package Size： 210 * 210 * 75mmDiameter： 1.75mmBubble： 100% no bubblesPrinting Temperature： 190-230℃Tensile Strength： 68MPaN.W.： 1KGSuitable for all 3D printers on the market Color: Carbon Black/Milk White/Banana Yellow/Ocean Blue/Rose Red/Sky Grey/Sky Blue Package Included: 1 x filament

Features:   Easy to print. Easy to remove by bending and popping it off. Easy to maintain. Double-sided. Lower runing cost  especially for printing farm. Genuine PEI powder coating. Hardened steel spring sheet never diforming. Possible to adding ABL  for some low-cost printers. Size: 300 x 300mm   Package included: 1 x Steel Plate 1 x Magnetic Sticker

Wood Filament Features 1. Environmental protection, non-toxic, biodegradable; 2. Close to the effect of solid wood; 3. Low shrinkage Suitable for all models of  FDM 3D printers, suitable for A model with a wooden effect, such as portraits, small Furniture decoration, etc.   Wood PLA filament made of 18% wood fiber and 82% Polylatic acid. It is environmental, non-toxic material that close to the real wood effect. Cam print wood effect model, such as portrait, small furniture furnishing articles. 100% no bubble 3d printer material.   Product Description Diameter: 1.75mm/3.0mm Tolerance: +/-0.02mm Print speed: 30-50mm/s Color: Wood Recommend print Temperature: 170-190℃ Platform temperature: 80-120℃ Net weight: 1kg with spool Gross weight: 1.3kg Length：1.75mm(1kg)=330m                 3.00mm(1kg)=115m Package Included: 1* Wood PLA Filament

Specifications:   - Material: Polyester fiber -  Color: Black outer, silver-grey lining -  Length: 43cm -  Width: 43cm -  Height: 32cm   Features:   1. Protect Your Printer From Dust, Animal Hair & More! 2. Easy to Clean! Machine Washable & Dryer Safe! 3. Anti-static protection.   Package Included   1 x Dust Cover  

Parameters: Type: Creatbot Material: Brass Size: 0.4mm Filament: 3.0mm Package Included: 1 x 3.0mm Nozzle