Description:
Machifit No Power Spindle Assembly Small Lathe Accessories Trimming Belt JTO/B10/B12/B16 Drill Chuck Set
Specification:
| Product Name | Drill Chuck Set |
| Brand | Machifit |
| Type |
B10 Drill Chuck JTO Drill Chuck B16 Drill Chuck B12 Drill Chuck JTO Drill Chuck Connecting Rod B10 Drill Chuck Connecting Rod XL10T 5mm Hole Synchronization Wheel |
| Cutting ability | Unpowered spindle |
| Cutting depth | 10 (mm) |
| Saw blade size/diameter | 90 * 10 (mm) |
| No load speed | 10000 (RPM) |
| Scope of application | Making small saw |
| Power type | No power |
| Quantity | 1 Set x Drill Chuck Set |
Features:
- The shipper and the synchronous wheel are equipped with the gasket isolation of 1mm to lock tightly.
- The rotation is smooth and without phase grinding, and the accuracy is good.
- No power spindle, precision machining by grinding machine, precision of 0.005mm, that is, a high-precision spindle with less than one wire.
- DIY bench drill, bench mill, table saw and so on.
- Through the connecting rod, the shaft sleeve link is eliminated, and the drill clamp is installed directly, so the accuracy is higher.
- The non-powered spindle (Mohs drill chuck connecting rod) is precision machined with a grinding machine with an accuracy of 0.005MM. Can be used to make bench drills, bench mills, table saws, etc.
Installation tips:
1. Pay attention to the mounting direction of the bearing, and carefully look at the description diagram or video.
2. Do not damage the bearing blindly. Patience and carefulness are the key points of mechanical work.
3. Various methods: to activate the brain and complete the assembly.
4. The sliding block and the contact surface of the synchronous wheel shall be separated by gasket to prevent phase grinding.The gasket is small. Don't lose it.
| Type | Quantity |
| XL10T 5mm Hole Synchronization Wheel | 1 Pc x XL10T 5mm hole synchronization wheel 1 Pc x 120XL Timing belt 1 Pc x Wrench |
| B10 Drill Chuck | 1 Pc x Drill chuck connecting rod 1 Pc x XL20T 10mm hole synchronization wheel 1 Pc x 10mm hole slider (including 2 bearings) 1 Pc x 0.6-6mm B10 Drill Chuck 1 Pc x M10 Shaft sleeve (Including shaft socket wrench, synchronous wheel wrench, drill clamp key) |
| JTO Drill Chuck | 1 Pc x Drill chuck connecting rod 1 Pc x XL20T 10mm hole synchronization wheel 1 Pc x 10mm hole slider (including 2 bearings) 1 Pc x 0.3-4mm JTO Drill Chuck 1 Pc x M10 Shaft sleeve (including shaft socket wrench, synchronous wheel wrench, drill clamp key) |
| JTO Drill Chuck Connecting Rod | 1 Pc x The JTO shank |
| B10 Drill Chuck Connecting Rod | 1 Pc x The B10 shank |
| B12 Drill Chuck | 1 Pc x Drill chuck connecting rod 1 Pc x XL20T 10mm hole synchronization wheel 1 Pc x 10mm hole slider (including 2 bearings) 1 Pc x 1.5-10mm B12 Drill Chuck 1 Pc x M10 Shaft sleeve (including shaft socket wrench, synchronous wheel wrench, drill clamp key) |
| B16 Drill Chuck | 1 Pc x Drill chuck connecting rod 1 Pc x XL20T 10mm hole synchronization wheel 1 Pc x 10mm hole slider (including 2 bearings) 1 Pc x 1.5-13mm B16 Drill Chuck 1 Pc x M10 Shaft sleeve (including shaft socket wrench, synchronous wheel wrench, drill clamp key) |
More Details:
(1) FREE Shipping 10 - 15 business days, (2) Standard Shipping 7 - 12 business days.
Shipping and Delivery Estimates
We ship in-stock orders as soon as possible. This is often within two business days, but there are situations where it may take longer. All estimates are based on business days.
Note:
(1) The shipping time mentioned above refers to the estimated time of business days that the shipment will take after an order has been shipped.
(2) Business days do not include Saturday/Sunday and any public holidays.
(3) These estimates are based on normal circumstances and are not a guarantee of delivery times.
(4) We are not responsible for the failures or delays in delivery resulting from any force majeure event, such as natural disaster, bad weather, war, customs issues, and any other event beyond our direct control.
for more information please visit our Shipping Policy Page.
Our policy lasts 14 days. If 14 days have gone by since your purchase, unfortunately we can't offer you a refund or exchange. To be eligible for a return, your item must be unused and in the same condition that you received it. It must also be in the original packaging.
Women's Sizing & Fit Guide
Please be aware that most of our clothing is Juniors' sizing, which runs smaller than regular US / European Women sizing. Refer to the measurements chart for each individual product to determine the best size for you. Product specific size chart and information can be found in product description or in product picture gallery.
Our team does it's best to include accurate size details and measurement of each item in the product descriptions. If you have questions regarding sizing or any other information on a specific item, please email us at support@mrslm.com for specific details.
Find the best size
When comparing your measurements to those listed on the site, make sure to check if the fabric is stretchy or not. If it is, it can stretch an inch or more.
- Bust: Wrap the measuring tape loosely around the fullest part of your bust to ensure a comfortable fit.
- Waist: Measure the narrowest part of your natural waist, holding the measuring tape loose enough to fit comfortably.
- Hips: Drape the measuring tape around the widest part of your hips, resting the tape comfortably against your body.
- Length: For tops and dresses, measure from the top of your shoulder to the hem. For strapless dresses, measure from the highest part of the neckline to the hem. For pants and skirts, measure from the top of the waist to the hem.
- Sleeve: With your arm outstretched, measure from the base of your neck to the end of the sleeve hem to determine where the sleeve length will fall on you.
Size Chart
Dresses Size Chart
Dress Size Chart (Inch)
|
DRESSES SIZE IN INCHES |
||||
| SIZE | US / CAN | BUST | WAIST | HIPS |
| XS | 0 | 31"-32" | 24"-25" | 34"-35" |
| S | 2-4 | 33"-34" | 26"-27" | 36"-37" |
| M | 6-8 | 35"-36" | 28"-29" | 38"-39" |
| L | 10-12 | 37"-39" | 30"-32" | 40"-42" |
| XL | 14 | 40"-42" | 33"-35" | 43"-45" |
Dress Size Chart (cm)
|
DRESSES SIZE IN CM |
||||
| SIZE | US / CAN | BUST | WAIST | HIPS |
| XS | 0 | 78.7-81.2 | 60.9-63.5 | 86.3-88.9 |
| S | 2-4 | 83.8-86.3 | 66-68.5 | 91.4-93.9 |
| M | 6-8 | 88.9-91.4 | 71.1-73.6 | 96.5-99 |
| L | 10-12 | 93.9-99 | 76.2-81.2 | 101.6-106.6 |
| XL | 14 | 101.6-106.6 | 81.2-88.9 | 109.2-114.3 |
Tops Size Chart
Tops Size Chart (Inch)
|
TOPS SIZE IN INCHES |
|||
| SIZE | US / CAN | BUST | WAIST |
| XS | 0 | 31"-32" | 24"-25" |
| S | 2-4 | 33"-34" | 26"-27" |
| M | 6-8 | 35"-36" | 28"-29" |
| L | 10-12 | 37"-39" | 30"-32" |
| XL | 14 | 40"-42" | 33"-35" |
Tops Size Chart (cm)
|
TOPS SIZE IN CM |
|||
| SIZE | US / CAN | BUST | WAIST |
| XS | 0 | 78.7-81.2 | 60.9-63.5 |
| S | 2-4 | 83.8-86.3 | 66-68.5 |
| M | 6-8 | 88.9-91.4 | 71.1-73.6 |
| L | 10-12 | 93.9-99 | 76.2-81.2 |
| XL | 14 | 101.6-106.6 | 83.8-88.9 |
Bottoms Size Chart
Bottoms Size Chart (Inch)
|
BOTTOMS SIZE IN INCHES |
|||
| SIZE | US / CAN | WAIST | HIPS |
| XS | 0 | 24"-25" | 34"-35" |
| S | 2-4 | 26"-27" | 36"-37" |
| M | 6-8 | 28"-29" | 38"-39" |
| L | 10-12 | 30"-32" | 40"-42" |
| XL | 14 | 33"-35" | 43"-45" |
Bottoms Size Chart (cm)
|
BOTTOMS SIZE IN CM |
|||
| SIZE | US / CAN | WAIST | HIPS |
| XS | 0 | 60.9-63.5 | 86.3-88.9 |
| S | 2-4 | 66-68.5 | 91.4-93.9 |
| M | 6-8 | 71.1-73.6 | 96.4-93.9 |
| L | 10-12 | 76.2-81.2 | 101.6-106.6 |
| XL | 14 | 83.8-88.9 | 109.2-114.3 |
Denim Size Chart
Denim Size Chart (Inch)
|
DENIM SIZE IN INCHES |
||||
| WAIST SIZE | JUNIOR SIZING | WAIST | LOW WAIST | HIPS |
| 24 | 0 | 24"-25" | 26"-27" | 32"-33" |
| 25 | 1 | 25"-26" | 28"-29" | 33"-34" |
| 26 | 3 | 26"-27" | 30"-31" | 34"-35" |
| 27 | 5 | 27"-28" | 31"-32" | 35"-36" |
| 28 | 7 | 28"-29" | 32"-33" | 36"-37" |
| 29 | 9 | 29"-30" | 33"-34" | 37"-38" |
| 30 | 11 | 30"-31" | 34"-35" | 38"-39" |
| 31 | 13 | 31"-3" | 35"-36" | 39"-40" |
| 32 | 15 | 32"-33" | 36"-37" | 40"-41" |
Denim Size Chart (cm)
|
DENIM SIZE IN CM |
||||
| WAIST SIZE | JUNIOR SIZING | WAIST | LOW WAIST | HIPS |
| 24 | 0 | 60.9-63.5 | 66-68.5 | 81.2-83.8 |
| 25 | 1 | 63.5-66 | 71.1-73.6 | 83.8-86.3 |
| 26 | 3 | 66-68.5 | 76.2-78.7 | 86.3-88.9 |
| 27 | 5 | 68.5-71.1 | 78.7-81.2 | 88.9-91.4 |
| 28 | 7 | 71.1-73.6 | 81.2-83.8 | 91.4-93.9 |
| 29 | 9 | 73.6-76.2 | 83.8-86.3 | 93.9-96.5 |
| 30 | 11 | 76.2-78.7 | 86.3-88.9 | 96.5-99 |
| 31 | 13 | 78.7-81.2 | 88.9-91.4 | 99-101.6 |
| 32 | 15 | 81.2-83.8 | 91.4-93.9 | 101.6-104.1 |
Swimwear Size Chart
Swimwear Size Chart (Inch)
|
SWIMWEAR SIZE IN INCHES |
||||
| SIZE | US / CAN | BUST | WAIST | HIPS |
| XS | 0 | 31"-32" | 24"-25" | 33"-34" |
| S | 2 | 33"-34" | 26"-27" | 35"-37" |
| M | 4 | 35"-36" | 28"-29" | 37"-38" |
| L | 6 | 37"-39" | 30"-32" | 39"-41" |
| XL | 8 | 40"-42" | 33"-35" | 42"-44" |
Swimwear Size Chart (cm)
|
SWIMWEAR SIZE IN CM |
||||
| SIZE | US / CAN | BUST | WAIST | HIPS |
| XS | 0 | 78.7-81.2 | 60.9-63.5 | 83.8-86.3 |
| S | 2 | 83.8-86.3 | 66-68.5 | 88.9-93.9 |
| M | 4 | 88.9-91.4 | 71.1-73.6 | 93.9-96.5 |
| L | 6 | 93.9-99 | 76.2-81.2 | 99-104.1 |
| XL | 8 | 101.6-106.6 | 81.2-88.9 | 106.6-111.7 |
Shoes Size Chart
| US | EURO | UK | AUS | JAPAN | CHINA |
| 5 | 35-36 | 3 | 3.5 | 21.5 | 35 |
| 5.5 | 36 | 3.5 | 4 | 22 | 35.5 |
| 6 | 36-37 | 4 | 4.5 | 22.5 | 36 |
| 6.5 | 37 | 4.5 | 5 | 23 | 36.5 |
| 7 | 37-38 | 5 | 5.5 | 23.5 | 37 |
| 7.5 | 38 | 5.5 | 6 | 24 | 37.5 |
| 8 | 38-39 | 6 | 6.5 | 24.5 | 38 |
| 8.5 | 39 | 6.5 | 7 | 25 | 38.5 |
| 9 | 39-40 | 7 | 7.5 | 25.5 | 39 |
| 9.5 | 40 | 7.5 | 8 | 26 | 39.5 |
| 10 | 40-41 | 8 | 8.5 | 26.5 | 40 |
| 11 | 41-42 | 9 | 9.5 | 27.5 | 41 |
Attention: This guide provides general sizing information only, and fit can vary depending on style and brand. For more specific sizing information on the product, please refer to product description.
NOTE:
- All models are wearing size small in tops and dresses, and size 1, 3, or 5 in jeans depending on their body type.
- Most kalles jeans & dresses have some stretch, please refer to product description for fabric details.
- Most kalles bottoms have an inseam of 31-34” depending on the cut and style. Sizing may vary depending on cut and style.
More from Machine Tools & Accessories
Recently viewed
