Click here buy 2806.5 1300KV Motor Version

Click here buy Analog Version

Introduction:

iFlight 7 inch Long-Range Drone that can carry bigger batteries to get the flight time to surf the swiss alps if you want!

Super stiff frame for minimum resonance and 2806.5 motors for maximum 7inch prop control.

Fly big batteries top-mounted, or even bigger batteries bottom-mounted, 6cells recommended or 5cells for slow cruising. 

GPS functionality to find your way back and Betaflight GPS Rescue mode ready to setup (default OFF to prevent unexpected behaviour; Setup instructions included).

Vertical and horizontal TBS Crossfire antenna mounts included to cover you and your antenna dead ends.

Features:

- 6mm rigid arm design for more stiffness

- Top- and bottom battery mount option

- XING 2806.5 efficient wide stator motors

- GPS pre-installed for more safety at distance

- TPU Bottom Stand for Gopro Camera  (Camera and Camera Mount are NOT included)

- 360° TPU protection, DJI cam protection and antenna mounts

- DJI FPV Air Unit, buttery-smooth 720p120fps FPV feed (TPU soft mounted) 

- No props in view (DJI Air unit record in 1080p/60fps)

- Battery voltage LED status light (illuminated IF logo on the bottom)

Specification:

Brand Name: iFlight

Model: Chimera7 Speed Cruiser Version ( Motor is Diffirenct)

Item Name: 320mm F7 6S 7 Inch Long Range FPV Racing Drone

Drone Wheelbase: 320mm

Optional Receiver Version: BNF-DJI  ( Built-in DJI Receiver)

                                            TBS Crossfire Nano RX ( Built-in DJI Receiver & External TBS Crossfire Nano Receiver)

Weight: 628.1 ( without Battery)

Flight Time: 17-19 Mins ( Take Example as 6S 4500mAh Lipo)

Chimera7 320mm Frame Kit	Wheelbase: 320mm Main body dimension: 258*199mm Bottom to top distance: 20mm Arm thickness: 6mm Bottom plate thickness: 3mm Top plate thickness: 2mm Upper(middle) plate thickness: 3mm Camera plate thickness: 3mm (included TPU inserts)
SucceX-D F7 V2.1 TwinG Flight Controller	MCU: 216MHz STM32F722 Gyroscope: 2x ICM20689 Barometer: YES Blackbox: 32MB Betaflight OSD:  YES BEC: 5V 2.5A / 9V 2.5A Current sensor scale:  100 Inverter for SBUS input (UART2-RX) Smartaudio & Tramp VTX protocol supported Beeper pad: Yes RSSI input pad: No UARTs: 5 Motor outputs: 8 8 pin 4in1 ESC port (GND, VBAT, M1, M2, M3, M4, CUR, R5) 6 pin DJI Air Unit port (R1, GND, R2, T2, GND, 9V) BLHeli32 Telemetry：RX5 Input voltage: recommended 2-6S, MAX 8S Firmware Target:   IFLIGHT_F722_TWING Mounting pattern: 30.5*30.5mm φ4mm with Grommets φ3mm Dimensions:  36x36mm Weight: 7.5g USB type-C
SucceX 50A BLHeli_32 4in1 ESC	MCU: STM32F051 Up tp 48kHz PWM frequency Capacitance: 470uF/50V Current Sensor: Yes Input: 2-6S LIPO Constant: 50A / Burst: 60A BlHeli32 telemetry: Yes BEC: No Supports up to Dshot1200, Proshot, Oneshot, Multishot  Target: iFlight-BL32-4IN1 Weight: 14.4g Size: 43x39mm (including the power pads) Mounting Hole: 30.5x30.5mm/Φ3mm
XING 2806.5 1800KV Motor	Voltage: 2-6S KV: 1800KV Configuration: 12N14P Bearing: NMB 11*5*5 Stator Diameter: 28 Stator Length: 6.5mm Shaft Diameter: M5 No.of Cells(Lipo): 2-6S Weight: 49.5g(with a short cable) Motor mount hole: 19x19 φ3mm
Gemfan 7040 3-Blade Propeller	Quantity: 2 CW & 2 CCW Color may vary
DJI Air Unit HD Digital System & Camera	Weight : Air Unit (Camera included): 45.8 g / 3.9 g (MMCX elbow each) Dimensions Air Unit: 44 x 37.8 x 14.4 mm Camera: 27.4 x 21.1 x 20.1 mm Coaxial Cable: 100 mm
Optional Receiver Version	BNF-DJI Version: Built-in DJI Receiver ( On DJI Air Unit Module); this version is compatible with DJI Remote Controller. TBS Crossfire Nano RX Version: Built-in DJI Receiver and has a external TBS Crossfire Nano RX; this version is compatible with DJI Remote Controller and Official TBS Radio Transmitter
Lipo Battery ( NOT Included)	Recommend 5S 3000mAh above (slow cruising) or 6S 2500mAh above

Package Included:

1x Chimera7 Drone

1x TPU bottom stand incl. lock screw ( for Installing TPU Camera Mount)

1x DJI FPV Camera ( Built Well on Drone)

1x DJI FPV Air Unit Module  ( Built Well on Drone)

2x 5.8G Albatross RP-SMA Antenna LHCP 150mm

2x Gemfan 7040 Propeller CW

2x Gemfan 7040 Propeller CCW

4x 20x250mm PU Leather Battery Strap (Color May Vary)

(1) FREE Shipping 10 - 15 business days, (2) Standard Shipping 7 - 12 business days.

Shipping and Delivery Estimates

We ship in-stock orders as soon as possible. This is often within two business days, but there are situations where it may take longer. All estimates are based on business days.

Note:

(1) The shipping time mentioned above refers to the estimated time of business days that the shipment will take after an order has been shipped.

(2) Business days do not include Saturday/Sunday and any public holidays.

(3) These estimates are based on normal circumstances and are not a guarantee of delivery times.

(4) We are not responsible for the failures or delays in delivery resulting from any force majeure event, such as natural disaster, bad weather, war, customs issues, and any other event beyond our direct control.

for more information please visit our Shipping Policy Page.

Our policy lasts 14 days. If 14 days have gone by since your purchase, unfortunately we can't offer you a refund or exchange. To be eligible for a return, your item must be unused and in the same condition that you received it. It must also be in the original packaging.