|Output voltage waveform:||Pure sine wave|
|Power(Rated power):||3000W (1500W)/ 4000W (2000W)/ 5000W (2500W) / 6000W (3000W)|
|Low-voltage protection:||9.5V/ 20V|
|Conversion rate:||93% or more|
|Size:||27*15*7CM(3000W) / 30*15*7CM(4000W) /
- High-pre-cision circuit board.
-Built-in intelligent control chip.
-Color LCD screen integration.
- Dual cooling fans to extend the life of the inverter.
-Screw terminal. Pluggable plug, easy to replace the cable.
-Universal three-hole socket, strong compatibility, most appliances are suitable.
-Can display the remaining battery capacity, input voltage, output voltage and load power.
- Pure sine wave, smart filter, no interference on the electrical, to protect electrical appliances.
-Up to 93% conversion rate, reduce the conversion loss of 30%, increase 30% continuous power.
-Using STM chip technology, high reliability, seismic resistance, solder joint defect rate is low, reducing battery and radio frequency interference.
-Alloy shell, light weight, good thermal conductivity, can quickly reduce the temperature of components, work long hours are not affected.
-Six intelligent protection, overload protection, high voltage protection, low voltage protection, over temperature protection, reverse polarity protection, short circuit protection.
-Intelligent temperature control fan, make the inverter more quiet. When the temperature ≤ 45 ℃, the fan stops working, when the temperature ≥ 45 ℃, the fan began to work.
- Buzzer reminder device. Once any protection of the inverter is triggered, the inverter immediately disconnects the power supply and the load enters a protection mode and reminds people through a buzzer reminder.
1 x Inverter
1 x User manual
1 x Ultra-thick battery cable
(2 x Ultra-thick battery cable 5000W/6000W)
Correct Connet Way:
POSITIVE FROM THE BATTERY TO POSITIVE OF INVERTER and NEGATIVE FROM THE BATTERY TO NEGATIVE OF THE INVERTER!