Note: Since the driver board model is updated frequently, the appearance and chip will be different, please refer to the actual received. If you mind this, please buy carefully.
Model: T.V53.03 (Update from December 25, 2019)
(Update from September 1, 2020) (CN warehouse)
(Update from November, 2020) (CN warehouse) The specific model is mainly based on the received model, pay attention to burning the corresponding model firmware.
UK warehouse: T.V53.03 (The function has not changed, the only difference is that the chip model is different. Pay attention to write in T.V53.03 firmware .)
TV Format: Analog Signal
Support Language: Russian, English, Hindi, Simplified Chinese, Khmer, Vietnamese, Myanmar, French, German, Italian, Spanish.
Input Interface: PC / HDMI / TV / AV / USB multimedia playing
Power Adapter: DC 12V 3-5A
Screen interface: LVDS Double 6
Screen voltage: 3.3V / 5V / 12V (Jump cap)
Not only USB interface can be used to upgrade programs, but also can use to play video/music/photo, basically, formats are supported. You can also set a boot display pictures or LOGO and Mirror Enable.
Only supports the resolution of:
How to know if your panel suitable for this board?
Step 1: Find your LCD model's resolution (you can check the resolution from this link: http://www.panelook.com/index.php)
Step 2: Find and write in the corresponding firmware.
1. Put the firmware of "SKR8503_100.bin" in formatted USB flash disk(FAT32), then insert the USB disk and the 7KEY-Button to the board
2. After turn on the power, the light of the 7key button be Red then flash red faster.
IT KEEPS flashing and NEVER STOP. it's normal, just wait about 1 minute, it means upgrade has finished. then power off and pull off the u-disk. (Note that write programs do not power outages, crashing won't be able to use)
1 x Controller Board
1 x English Remote control
1 x IR
1 x 7 key button
1 x 2ch 6bit 30pins lvds cable 250mm length (
You can replace the screen line as needed.
1 x 1pcs CCFL inverter with 3.5mm pin pitch
The IR & KEY definition is special and different between v29 v56 v59 and 3463A, pls notice and don't mix up.
This kit is just for signal interface is 2ch 6 bit 30 pins and with 1pcs ccfl inverter
If you are not sure, pls provide your lcd panel model number, so we can help you, thanks