Chihai CHF-GM37-550ABHL Holzer Encoder DC Motor High Torque Gear Reducer D Axis Encoder Motor
Description:
Chihai CHF-GM37-550ABHL Holzer Encoder DC Motor High Torque Gear Reducer D Axis Encoder Motor
Specifications:
| Product Name | D Axis Encoder Motor |
| Model | CHR-GM37-550ABHL |
| External Diameter | ∮37mm ×L mm (different deceleration radio different length) |
| Shaft Diameter | ∮6mm, D thick 5.4mm (batch customizable) |
| Out Axis Length | Length 21mm, D Length 12mm |
| Voltage | DC 12V |
| Max Power | 40W |
| Weight | About 310g (different ratio different weight) |
| Application | Intelligent Robot, electric curtain, intelligent balance car, intelligent manipulator,etc |
| Quantity | 1 Pcs |
Encoders Conflg:
| Type | AB dual phase incremental encoder |
| Pulse Outputs of Rotation | Basic pulse 17 PPR × gear reduction ratio |
| Holzer Power Supply Voltage | DC 3.3V/ DC 5.0V |
| Basic Function | With the pull-up shaping resistor,the single-chip microcomputer can be used |
| Encoder Interface Type | XH 2.54-6PIN (Standard wiring) |
| Output Signal Type | Square wave AB phase |
| Response Frequency | 100kHz |
| Basic Pulse Number | 17 PPR |
| Poles of Magnetic Ring | 34 polse (17 pairs of poles) |
| Ratio | 1:6.3 |
1:10 |
1:18 |
1:30 |
1:50 |
1:90 |
1:150 |
1:270 |
1:450 |
| No-Load Current (mA) | ≤1100 |
≤1100 |
≤1100 |
≤1100 |
≤1100 |
≤1100 |
≤1100 |
≤1100 |
≤1100 |
| No-Load Speed (rpm) | 2650 | 1650 | 875 | 550 | 330 | 180 | 110 | 60 | 36 |
| Rated Torque (Kg.cm) | 2.0 | 3.0 | 5.5 | 9.0 | 15.0 | 27.0 |
Max torque 35.0kg.cm (3.4N.m) |
Max torque 35.0kg.cm (3.4N.m) |
Max torque 35.0kg.cm (3.4N.m) |
| Rated Torque (mN.m) | 196.1 | 294.1 | 539.2 | 882.3 | 1471 | 2647 |
Max torque 35.0kg.cm (3.4N.m) |
Max torque 35.0kg.cm (3.4N.m) |
Max torque 35.0kg.cm (3.4N.m) |
| Rated Torque (rpm) | 1700 | 1100 | 580 | 360 | 215 | 120 | 70 | 50 | 24 |
| Rated Current (A) | ≤6.0 | ≤6.0 |
≤6.0 |
≤6.0 |
≤6.0 |
≤6.0 |
≤6.0 |
≤4.5 | ≤3.8 |
| Stall Current (A) | 20.0 |
20.0 |
20.0 |
20.0 |
20.0 |
20.0 |
20.0 |
20.0 |
20.0 |
| Speed Changing Box(L) | 19.0 | 19.0 | 21.5 | 21.5 | 24.0 | 24.0 | 26.5 | 26.5 | 29.0 |
| Hall Resolution | 107.1 | 170 | 306 | 510 | 850 | 1530 | 2550 | 4590 | 7650 |
Features:
- Using MIM process, hardened steel D-hole gear.
- The motor is supported by upper and lower ball bearings, and the shaft sleeve is supported by 1 ball bearing.
- Tree wiring fixing modes, such as plug-in spring wiring, welding wiring, external screw fixing wiring.
- The body of the motor is equipped with heat dissipation holes to accelerate heat dissipation.
- Special PPS high temperature resistant plastic steel rear cove.
Package Included:
| 1 × |
D Axis Encoder Motor |
More Details:
(1) FREE Shipping 10 - 15 business days, (2) Standard Shipping 7 - 12 business days.
Shipping and Delivery Estimates
We ship in-stock orders as soon as possible. This is often within two business days, but there are situations where it may take longer. All estimates are based on business days.
Note:
(1) The shipping time mentioned above refers to the estimated time of business days that the shipment will take after an order has been shipped.
(2) Business days do not include Saturday/Sunday and any public holidays.
(3) These estimates are based on normal circumstances and are not a guarantee of delivery times.
(4) We are not responsible for the failures or delays in delivery resulting from any force majeure event, such as natural disaster, bad weather, war, customs issues, and any other event beyond our direct control.
for more information please visit our Shipping Policy Page.
Our policy lasts 14 days. If 14 days have gone by since your purchase, unfortunately we can't offer you a refund or exchange. To be eligible for a return, your item must be unused and in the same condition that you received it. It must also be in the original packaging.
Sizing & Fit Guide
Please be aware that most of our clothing is Juniors' sizing, which runs smaller than regular US / European Women sizing. Refer to the measurements chart for each individual product to determine the best size for you. Product specific size chart and information can be found in product description or in product picture gallery.
Our team does it's best to include accurate size details and measurement of each item in the product descriptions. If you have questions regarding sizing or any other information on a specific item, please email us at support@mrslm.com for specific details.
Find the best size
When comparing your measurements to those listed on the site, make sure to check if the fabric is stretchy or not. If it is, it can stretch an inch or more.
- Bust: Wrap the measuring tape loosely around the fullest part of your bust to ensure a comfortable fit.
- Waist: Measure the narrowest part of your natural waist, holding the measuring tape loose enough to fit comfortably.
- Hips: Drape the measuring tape around the widest part of your hips, resting the tape comfortably against your body.
- Length: For tops and dresses, measure from the top of your shoulder to the hem. For strapless dresses, measure from the highest part of the neckline to the hem. For pants and skirts, measure from the top of the waist to the hem.
- Sleeve: With your arm outstretched, measure from the base of your neck to the end of the sleeve hem to determine where the sleeve length will fall on you.
Size Chart
Dresses Size Chart
Dress Size Chart (Inch)
|
DRESSES SIZE IN INCHES |
||||
| SIZE | US / CAN | BUST | WAIST | HIPS |
| XS | 0 | 31"-32" | 24"-25" | 34"-35" |
| S | 2-4 | 33"-34" | 26"-27" | 36"-37" |
| M | 6-8 | 35"-36" | 28"-29" | 38"-39" |
| L | 10-12 | 37"-39" | 30"-32" | 40"-42" |
| XL | 14 | 40"-42" | 33"-35" | 43"-45" |
Dress Size Chart (cm)
|
DRESSES SIZE IN CM |
||||
| SIZE | US / CAN | BUST | WAIST | HIPS |
| XS | 0 | 78.7-81.2 | 60.9-63.5 | 86.3-88.9 |
| S | 2-4 | 83.8-86.3 | 66-68.5 | 91.4-93.9 |
| M | 6-8 | 88.9-91.4 | 71.1-73.6 | 96.5-99 |
| L | 10-12 | 93.9-99 | 76.2-81.2 | 101.6-106.6 |
| XL | 14 | 101.6-106.6 | 81.2-88.9 | 109.2-114.3 |
Tops Size Chart
Tops Size Chart (Inch)
|
TOPS SIZE IN INCHES |
|||
| SIZE | US / CAN | BUST | WAIST |
| XS | 0 | 31"-32" | 24"-25" |
| S | 2-4 | 33"-34" | 26"-27" |
| M | 6-8 | 35"-36" | 28"-29" |
| L | 10-12 | 37"-39" | 30"-32" |
| XL | 14 | 40"-42" | 33"-35" |
Tops Size Chart (cm)
|
TOPS SIZE IN CM |
|||
| SIZE | US / CAN | BUST | WAIST |
| XS | 0 | 78.7-81.2 | 60.9-63.5 |
| S | 2-4 | 83.8-86.3 | 66-68.5 |
| M | 6-8 | 88.9-91.4 | 71.1-73.6 |
| L | 10-12 | 93.9-99 | 76.2-81.2 |
| XL | 14 | 101.6-106.6 | 83.8-88.9 |
Bottoms Size Chart
Bottoms Size Chart (Inch)
|
BOTTOMS SIZE IN INCHES |
|||
| SIZE | US / CAN | WAIST | HIPS |
| XS | 0 | 24"-25" | 34"-35" |
| S | 2-4 | 26"-27" | 36"-37" |
| M | 6-8 | 28"-29" | 38"-39" |
| L | 10-12 | 30"-32" | 40"-42" |
| XL | 14 | 33"-35" | 43"-45" |
Bottoms Size Chart (cm)
|
BOTTOMS SIZE IN CM |
|||
| SIZE | US / CAN | WAIST | HIPS |
| XS | 0 | 60.9-63.5 | 86.3-88.9 |
| S | 2-4 | 66-68.5 | 91.4-93.9 |
| M | 6-8 | 71.1-73.6 | 96.4-93.9 |
| L | 10-12 | 76.2-81.2 | 101.6-106.6 |
| XL | 14 | 83.8-88.9 | 109.2-114.3 |
Denim Size Chart
Denim Size Chart (Inch)
|
DENIM SIZE IN INCHES |
||||
| WAIST SIZE | JUNIOR SIZING | WAIST | LOW WAIST | HIPS |
| 24 | 0 | 24"-25" | 26"-27" | 32"-33" |
| 25 | 1 | 25"-26" | 28"-29" | 33"-34" |
| 26 | 3 | 26"-27" | 30"-31" | 34"-35" |
| 27 | 5 | 27"-28" | 31"-32" | 35"-36" |
| 28 | 7 | 28"-29" | 32"-33" | 36"-37" |
| 29 | 9 | 29"-30" | 33"-34" | 37"-38" |
| 30 | 11 | 30"-31" | 34"-35" | 38"-39" |
| 31 | 13 | 31"-3" | 35"-36" | 39"-40" |
| 32 | 15 | 32"-33" | 36"-37" | 40"-41" |
Denim Size Chart (cm)
|
DENIM SIZE IN CM |
||||
| WAIST SIZE | JUNIOR SIZING | WAIST | LOW WAIST | HIPS |
| 24 | 0 | 60.9-63.5 | 66-68.5 | 81.2-83.8 |
| 25 | 1 | 63.5-66 | 71.1-73.6 | 83.8-86.3 |
| 26 | 3 | 66-68.5 | 76.2-78.7 | 86.3-88.9 |
| 27 | 5 | 68.5-71.1 | 78.7-81.2 | 88.9-91.4 |
| 28 | 7 | 71.1-73.6 | 81.2-83.8 | 91.4-93.9 |
| 29 | 9 | 73.6-76.2 | 83.8-86.3 | 93.9-96.5 |
| 30 | 11 | 76.2-78.7 | 86.3-88.9 | 96.5-99 |
| 31 | 13 | 78.7-81.2 | 88.9-91.4 | 99-101.6 |
| 32 | 15 | 81.2-83.8 | 91.4-93.9 | 101.6-104.1 |
Swimwear Size Chart
Swimwear Size Chart (Inch)
|
SWIMWEAR SIZE IN INCHES |
||||
| SIZE | US / CAN | BUST | WAIST | HIPS |
| XS | 0 | 31"-32" | 24"-25" | 33"-34" |
| S | 2 | 33"-34" | 26"-27" | 35"-37" |
| M | 4 | 35"-36" | 28"-29" | 37"-38" |
| L | 6 | 37"-39" | 30"-32" | 39"-41" |
| XL | 8 | 40"-42" | 33"-35" | 42"-44" |
Swimwear Size Chart (cm)
|
SWIMWEAR SIZE IN CM |
||||
| SIZE | US / CAN | BUST | WAIST | HIPS |
| XS | 0 | 78.7-81.2 | 60.9-63.5 | 83.8-86.3 |
| S | 2 | 83.8-86.3 | 66-68.5 | 88.9-93.9 |
| M | 4 | 88.9-91.4 | 71.1-73.6 | 93.9-96.5 |
| L | 6 | 93.9-99 | 76.2-81.2 | 99-104.1 |
| XL | 8 | 101.6-106.6 | 81.2-88.9 | 106.6-111.7 |
Shoes Size Chart
| US | EURO | UK | AUS | JAPAN | CHINA |
| 5 | 35-36 | 3 | 3.5 | 21.5 | 35 |
| 5.5 | 36 | 3.5 | 4 | 22 | 35.5 |
| 6 | 36-37 | 4 | 4.5 | 22.5 | 36 |
| 6.5 | 37 | 4.5 | 5 | 23 | 36.5 |
| 7 | 37-38 | 5 | 5.5 | 23.5 | 37 |
| 7.5 | 38 | 5.5 | 6 | 24 | 37.5 |
| 8 | 38-39 | 6 | 6.5 | 24.5 | 38 |
| 8.5 | 39 | 6.5 | 7 | 25 | 38.5 |
| 9 | 39-40 | 7 | 7.5 | 25.5 | 39 |
| 9.5 | 40 | 7.5 | 8 | 26 | 39.5 |
| 10 | 40-41 | 8 | 8.5 | 26.5 | 40 |
| 11 | 41-42 | 9 | 9.5 | 27.5 | 41 |
Attention: This guide provides general sizing information only, and fit can vary depending on style and brand. For more specific sizing information on the product, please refer to product description.
NOTE:
- All models are wearing size small in tops and dresses, and size 1, 3, or 5 in jeans depending on their body type.
- Most kalles jeans & dresses have some stretch, please refer to product description for fabric details.
- Most kalles bottoms have an inseam of 31-34” depending on the cut and style. Sizing may vary depending on cut and style.
More from Machine Tools & Accessories
Recently viewed
