This product can jog each movement of the manipulator.
The control circuit consists of two STC90C52 learning and development boards. Each pin is led out by a pin. It is convenient to learn. The two parts of the single-chip microcomputer are relatively independent. There are separate switch circuits, reset circuits and download ports.
Servo direction according to the picture
Servo position is connected according to silk screen prompts
Power supply: 5V3A, if the power supply is too small, servo shake will occur and it will not be controlled
Easy to learn by extending 2 servo interface
Reset the servos before installation, and each servo should be installed in the corresponding position.
Manual: Click here.
1 x Acrylic robot arm